Synthesis of Stable Cerium Oxide Nanoparticles Coated with Phosphonic Acid-Based Functional Polymers.

Functional polymers, such as poly(ethylene glycol) (PEG), terminated with a single phosphonic acid, hereafter PEGik-Ph are often applied to coat metal oxide surfaces during post-synthesis steps but are not sufficient to stabilize sub-10 nm particles in protein-rich biofluids. The instability is attributed to the weak binding affinity of post-grafted phosphonic acid groups, resulting in a gradual detachment of the polymers from the surface. Here, we assess these polymers as coating agents using an alternative route, namely, the one-step wet-chemical synthesis, where PEGik-Ph is introduced with cerium precursors during the synthesis. Characterization of the coated cerium oxide nanoparticles (CNPs) indicates a core-shell structure, where the cores are 3 nm cerium oxide and the shell consists of functionalized PEG polymers in a brush configuration. Results show that CNPs coated with PEG1k-Ph and PEG2k-Ph are of potential interest for applications as nanomedicines due to their high Ce(III) content and increased colloidal stability in cell culture media. We further demonstrate that the CNPs in the presence of hydrogen peroxide show an additional absorbance band in the UV-vis spectrum, which is attributed to Ce-O22- peroxo-complexes and could be used in the evaluation of their catalytic activity for scavenging reactive oxygen species.

Biobased epoxy reactive diluents prepared from monophenol derivatives: effect on viscosity and glass transition temperature of epoxy resins.

The use of reactive diluents is undeniably of paramount importance to develop epoxy resins which would meet more demanding and restrictive processes and applications in terms of viscosity and glass transition temperature. In the context of developing resins with low carbon impacts, 3 natural phenols namely carvacrol, guaiacol and thymol were selected and converted into monofunctional epoxies using a general glycidylation procedure. Without advanced purification, the developed liquid-state epoxies showed very low viscosities of 16 cPs to 55 cPs at 20 °C, which could be further reduced to 12 cPs at 20 °C when purification by distillation is applied. The dilution effect of each reactive diluent on DGEBA's viscosity was also assessed for concentrations ranging from 5 to 20 wt% and compared to commercial and formulated DGEBA-based resin analogues. Interestingly, the use of these diluents reduced the initial viscosity of DGEBA by a factor of ten while maintaining glass transition temperatures above 90 °C. This article provides compelling evidence of the possibility of developing new sustainable epoxy resins with characteristics and properties that can be fine-tuned by only adjusting the reactive diluent concentration.

Vanillin-Based Epoxy Vitrimers: Looking at the Cystamine Hardener from a Different Perspective.

Epoxy vitrimers encompass many advantages compared to traditional epoxy materials such as recyclability, repairability, and reprocessability. These properties are induced by the incorporation of dynamic reversible covalent bonds. Recently, the incorporation of aromatic disulfide bridges that are dynamic has expanded the development of new eco-friendly epoxy materials. Herein, we studied a bio-based aliphatic disulfide based on cystamine as a hardener with a vanillin-derived bio-sourced epoxy to prepare fully bio-based epoxy vitrimers. This article provides a comparative study between cystamine and an aromatic disulfide benchmark hardener issued from petrol resources. This work demonstrated that the presence of this aliphatic hardener has a significant influence not only on the reactivity, but most importantly on the resulting dynamic properties. An interesting yet counterintuitive accelerating effect of the dynamic exchanges was clearly demonstrated with only 2 to 20% of molar fraction of cystamine added to the aromatic disulfide formulation. A similar glass transition was obtained compared to the purely aromatic analogue, but relaxation times were decreased by an order of magnitude.

The Role of Crosslinker Molecular Structure on Mechanical and Light-Actuation Properties in Liquid Crystalline Networks.

Phase behavior modulation of liquid crystalline molecules can be addressed by structural modification at molecular level. Starting from a rigid rod-like core reduction of the symmetry or increase of the steric hindrance by different substituents generally reduces the clearing temperature. Similar approaches can be explored to modulate the properties of liquid crystalline networks (LCNs)-shape-changing materials employed as actuators in many fields. Depending on the application, the polymer properties have to be adjusted in terms of force developed under stimuli, kinetics of actuation, elasticity, and resistance to specific loads. In this work, the crosslinker modification at molecular level is explored towards the optimization of LCN properties as light-responsive artificial muscles. The synthesis and characterization of photopolymerizable crosslinkers, bearing different lateral groups on the aromatic core is reported. Such molecules are able to strongly modulate the material mechanical properties, such as kinetics and maximum tension under light actuation, opening up to interesting materials for biomedical applications.

Synthesis and Self-Assembly of UV-Cross-Linkable Amphiphilic Polyoxazoline Block Copolymers: Importance of Multitechnique Characterization.

In the nanomedicine field, there is a need to widen the availability of nanovectors to compensate for the increasingly reported side effects of poly(ethene glycol). Nanovectors enabling cross-linking can further optimize drug delivery. Cross-linkable polyoxazolines are therefore relevant candidates to address these two points. Here we present the synthesis of coumarin-functionalized poly(2-alkyl-2-oxazoline) block copolymers, namely, poly(2-methyl-2-oxazoline)-block-poly(2-phenyl-2-oxazoline) and poly(2-methyl-2-oxazoline)-block-poly(2-butyl-2-oxazoline). The hydrophilic ratio and molecular weights were varied in order to obtain a range of possible behaviors. Their self-assembly after nanoprecipitation or film rehydration was examined. The resulting nano-objects were fully characterized by transmission electron microscopy (TEM), cryo-TEM, multiple-angle dynamic and static light scattering. In most cases, the formation of polymer micelles was observed, as well as, in some cases, aggregates, which made characterization more difficult. Cross-linking was performed under UV illumination in the presence of a coumarin-bearing cross-linker based on polymethacrylate derivatives. Addition of the photo-cross-linker and cross-linking resulted in better-defined objects with improved stability in most cases.

Versatile Coating Platform for Metal Oxide Nanoparticles: Applications to Materials and Biological Science.

In this feature article, we provide an overview of our research on statistical copolymers as a coating material for metal oxide nanoparticles and surfaces. These copolymers contain functional groups enabling noncovalent binding to oxide surfaces and poly(ethylene glycol) (PEG) polymers for colloidal stability and stealthiness. The functional groups are organic derivatives of phosphorous acid compounds R-H2PO3, also known as phosphonic acids that have been screened for their strong affinity to metals and for their multidentate binding ability. Herein we develop a polymer-based coating platform that shares features with the self-assembled monolayer (SAM) and layer-by-layer (L-b-L) deposition techniques. The milestones of this endeavor are the synthesis of PEG-based copolymers containing multiple phosphonic acid groups, the implementation of simple protocols combining versatility with high particle production yields, and the experimental evidence of the colloidal stability of the coated particles. As a demonstration, coating studies are conducted on cerium (CeO2), iron (γ-Fe2O3), aluminum (Al2O3), and titanium (TiO2) oxides of different sizes and morphologies. We finally discuss applications in the domain of nanomaterials and nanomedicine. We evaluate the beneficial effects of coatings on redispersible nanopowders, contrast agents for in vitro/vivo assays, and stimuli-responsive particles.

Persistent luminescence nanoparticles functionalized by polymers bearing phosphonic acid anchors: synthesis, characterization, and in vivo behaviour.

Optical in vivo imaging has become a widely used technique and is still under development for clinical diagnostics and treatment applications. For further development of the field, researchers have put much effort into the development of inorganic nanoparticles (NPs) as imaging probes. In this trend, our laboratory developed ZnGa1.995O4Cr0.005 (ZGO) nanoparticles, which can emit a bright persistent luminescence signal through the tissue transparency window for dozens of minutes and can be activated in vivo with visible irradiation. These properties endow them with unique features, allowing us to recover information over a long-time study with in vivo imaging without any background. To target tissues of interest, ZGO must circulate long enough in the blood stream, a phenomenon which is limited by the mononuclear phagocyte system (MPS). Depending on their size, charge and coating, the NPs are sooner or later opsonized and stored into the main organs of the MPS (liver, spleen, and lungs). The NPs therefore have to be coated with a hydrophilic polymer to avoid this limitation. To this end, a new functionalization method using two different polyethylene glycol phosphonic acid polymers (a linear one, later named lpPEG and a branched one, later named pPEG) has been studied in this article. The coating has been optimized and characterized in various aqueous media. The behaviour of the newly functionalized NPs has been investigated in the presence of plasmatic proteins, and an in vivo biodistribution study has been performed. Among them ZGOpPEG exhibits a long circulation time, corresponding to low protein adsorption, while presenting an effective one-step process in aqueous medium with a low hydrodynamic diameter increase. This new method is much more advantageous than another strategy we reported previously that used a two-step PEG silane coating performed in an organic solvent (dimethylformamide) for which the final hydrodynamic diameter was twice the initial diameter.

Antioxidant Activity and Toxicity Study of Cerium Oxide Nanoparticles Stabilized with Innovative Functional Copolymers.

Oxidative stress, which is one of the main harmful mechanisms of pathologies including ischemic stroke, contributes to both neurons and endothelial cell damages, leading to vascular lesions. Although many antioxidants are tested in preclinical studies, no treatment is currently available for stroke patients. Since cerium oxide nanoparticles (CNPs) exhibit remarkable antioxidant capacities, the objective is to develop an innovative coating to enhance CNPs biocompatibility without disrupting their antioxidant capacities or enhance their toxicity. This study reports the synthesis and characterization of functional polymers and their impact on the enzyme-like catalytic activity of CNPs. To study the toxicity and the antioxidant properties of CNPs for stroke and particularly endothelial damages, in vitro studies are conducted on a cerebral endothelial cell line (bEnd.3). Despite their internalization in bEnd.3 cells, coated CNPs are devoid of cytotoxicity. Microscopy studies report an intracellular localization of CNPs, more precisely in endosomes. All CNPs reduces glutamate-induced intracellular production of reactive oxygen species (ROS) in endothelial cells but one CNP significantly reduces both the production of mitochondrial superoxide anion and DNA oxidation. In vivo studies report a lack of toxicity in mice. This study therefore describes and identifies biocompatible CNPs with interesting antioxidant properties for ischemic stroke and related pathologies.

Build-To-Specification Vanillin and Phloroglucinol Derived Biobased Epoxy-Amine Vitrimers.

Epoxy resins are widely used in the composite industry due to their dimensional stability, chemical resistance, and thermo-mechanical properties. However, these thermoset resins have important drawbacks. (i) The vast majority of epoxy matrices are based on non-renewable fossil-derived materials, and (ii) the highly cross-linked molecular architecture hinders their reprocessing, repairing, and recycling. In this paper, those two aspects are addressed by combining novel biobased epoxy monomers derived from renewable resources and dynamic crosslinks. Vanillin (lignin) and phloroglucinol (sugar bioconversion) precursors have been used to develop bi- and tri-functional epoxy monomers, diglycidyl ether of vanillyl alcohol (DGEVA) and phloroglucinol triepoxy (PHTE) respectively. Additionally, reversible covalent bonds have been incorporated in the network by using an aromatic disulfide-based diamine hardener. Four epoxy matrices with different ratios of epoxy monomers (DGEVA/PHTE wt%: 100/0, 60/40, 40/60, and 0/100) were developed and fully characterized in terms of thermal and mechanical properties. We demonstrate that their performances are comparable to those of commonly used fossil fuel-based epoxy thermosets with additional advanced reprocessing functionalities.

Sustainable Series of New Epoxidized Vegetable Oil-Based Thermosets with Chemical Recycling Properties.

This work reports for the first time the copolymerization studies of 11 newly synthesized epoxidized vegetable oils (EVOs) that reacted with a disulfide-based aromatic dicarboxylic acid (DCA) to produce thermoset materials with recyclability properties. These new EVOs' reactivity and properties were compared with those of the two commercial references: epoxidized linseed oil (ELO) and epoxidized soybean oil (ESO). The structure-reactivity correlation is proposed by differential scanning calorimetry (DSC) analysis, corroborating the epoxy content of EVO monomers, the initiator effect, the copolymerization reaction enthalpy, and the temperature range. The thermomechanical properties of the obtained thermosets were evaluated and discussed in correlation with the structure and reactivity of monomers by dynamic mechanical analysis (DMA), tensile testing, and thermogravimetric analysis (TGA). It has been found that the higher the EVO functionality, the higher is the reactivity, cross-linking density, and final performances, with tan δ values ranging from 34 to 111 °C. This study investigates the chemical recycling and the solvent resistance of these vitrimer-like materials that have a high bio-based carbon content, from 58 to 79%, with potential application in coating or composite materials in the automotive sector.

Polymer-Coated Cerium Oxide Nanoparticles as Oxidoreductase-like Catalysts.

Cerium oxide nanoparticles have been shown to mimic oxidoreductase enzymes by catalyzing the decomposition of organic substrates and reactive oxygen species. This mimicry can be found in superoxide radicals and hydrogen peroxides, which are harmful molecules produced in oxidative stress-associated diseases. Despite the fact that nanoparticle functionalization is mandatory in the context of nanomedicine, the influence of polymer coatings on their enzyme-like catalytic activity is poorly understood. In this work, six polymer-coated cerium oxide nanoparticles are prepared by the association of 7.8 nm cerium oxide cores with two poly(sodium acrylate) and four poly(ethylene glycol) (PEG)-grafted copolymers with different terminal or anchoring end groups, such as phosphonic acids. The superoxide dismutase-, catalase-, peroxidase-, and oxidase-like catalytic activities of the coated nanoparticles were systematically studied. It is shown that the polymer coatings do not affect the superoxide dismutase-like, impair the catalase-like and oxidase-like, and surprisingly improves peroxidase-like catalytic activities of cerium oxide nanoparticles. It is also demonstrated that the particles coated with the PEG-grafted copolymers perform better than the poly(acrylic acid)-coated ones as oxidoreductase-like enzymes, a result that confirms the benefit of having phosphonic acids as anchoring groups at the particle surface.

Sustainable access to fully biobased epoxidized vegetable oil thermoset materials prepared by thermal or UV-cationic processes.

Beyond the need to find a non-toxic alternative to DiGlycidyl Ether of Bisphenol-A (DGEBA), the serious subject of non-epichlorohydrin epoxy resins production remains a crucial challenge that must be solved for the next epoxy resin generations. In this context, this study focuses on the valorization of vegetable oils (VOs) into thermoset materials by using (i) epoxidation of the VOs through the "double bonds to epoxy" synthetic route and (ii) synthesis of crosslinked homopolymers by UV or hardener-free thermal curing processes. A thorough identification, selection and physico-chemical characterization of non-edible or non-valuated natural vegetable oils were performed. Selected VOs, characterized by a large range of double bond contents, were then chemically modified into epoxides thanks to an optimized, robust and sustainable method based on the use of acetic acid, hydrogen peroxide and Amberlite® IR-120 at 55 °C in toluene or cyclopentyl methyl ether (CMPE) as a non-hazardous and green alternative solvent. The developed environmentally friendly epoxidation process allows reaching almost complete double bond conversion with an epoxy selectivity above 94% for the 12 studied VOs. Finally, obtained epoxidized vegetable oils (EVOs), characterized by an epoxy index from 2.77 to 6.77 meq. g-1 were cured using either UV or hardener-free thermal curing. Both methods enable the synthesis of 100% biobased EVO thermoset materials whose thermomechanical performances were proved to linearly increase with the EVOs' epoxy content. This paper highlights that tunable thermomechanical performances (T α from -19 to 50 °C and T g from -34 to 36 °C) of EVO based thermoset materials can be reached by well selecting the starting VO raw materials.

Dual Cross-linking of Epoxidized Linseed Oil with Combined Aliphatic/Aromatic Diacids Containing Dynamic S-S Bonds Generating Recyclable Thermosets.

The end-of-life of thermoset materials is a real issue that confronts our society, and the strategy of introducing dynamic reversible bonds can be a sustainable solution to overcome this problem. This study shows an efficient way to produce biobased and recyclable thermosets, for a circular use. To reduce the production costs linked to energy and duration, an improved curing process is proposed by combining aromatic and aliphatic diacid hardeners containing dynamic S-S bonds. The work demonstrates the increased reactivity of epoxidized vegetable oil reacted with the two diacids. The structural evolutions during the exchange reactions that allow the recyclability were followed by Fourier transformed-infrared and nuclear magnetic resonance spectroscopies, high-performance liquid chromatography, and mass spectroscopy. The curing process was studied by differential scanning calorimetry and kinetic study.

Recyclable, Repairable, and Reshapable (3R) Thermoset Materials with Shape Memory Properties from Bio-Based Epoxidized Vegetable Oils.

The preparation of thermosets based on epoxidized vegetable oils (EVOs) involved a peculiar attention in recent years; however, most of them cannot be recycled once cross-linked. In the present work, epoxy thermosetting resins like-vitrimers with dynamic disulfide covalent bonds were prepared by copolymerizing twelve EVOs with 2,2'-dithiodibenzoic acid, as hardener. Here, we show for the first time the reprocessability, repairability, and recyclability properties of EVOs thermosets. The 3R abilities were evaluated in correlation with the EVO epoxy contents, which influence the final thermo-mechanical properties of the recycled material. The virgin versus recycled materials' comparison was studied by FT-IR, DSC, TGA, and DMA, also comparing their swelling ability and high gel content. The study investigates, in addition, the excellent shape memory properties of the reprocessed EVOs/disulfide materials.

Serum Protein-Resistant Behavior of Multisite-Bound Poly(ethylene glycol) Chains on Iron Oxide Surfaces.

Recent surveys have shown that the number of nanoparticle-based formulations actually used at a clinical level is significantly lower than that expected a decade ago. One reason for this is that the physicochemical properties of nanoparticles fall short for handling the complexity of biological environments and preventing nonspecific protein adsorption. In this study, we address the issue of the interactions of plasma proteins with polymer-coated surfaces. With this aim, we use a noncovalent grafting-to method to functionalize iron oxide sub-10 nm nanoparticles and iron oxide flat substrates and compare their protein responses. The functionalized copolymers consist of alternating poly(ethylene glycol) (PEG) chains and phosphonic acid grafted on the same backbone. Quartz crystal microbalance with dissipation was used to monitor polymer adsorption kinetics and evaluate the resistance to protein adsorption. On flat substrates, functionalized PEG copolymers adsorb and form a brush in moderate or highly stretched regimes, with densities between 0.15 and 1.5 nm-2. PEG layers using phosphonic acid as linkers exhibit excellent protein resistance. In contrast, layers prepared with carboxylic acid as the grafting agent exhibit mitigated protein responses and layer destructuration. The present study establishes a correlation between the long-term stability of PEG-coated particles in biofluids and the protein resistance of surfaces coated with the same polymers.

Sorption properties of a new thermosensitive copolymeric sorbent bearing phosphonic acid moieties in multi-component solution of cationic species.

In this paper, original thermosensitive copolymers bearing phosphonic acid groups, namely the poly(N-n-propylacrylamide-stat-2-(methacryloyloxy)methylphosphonic acid) (P(NnPAAm-stat-hMAPC1)) were synthesized, and their sorption properties for three divalent cations (Ni(2+), Ca(2+), Cd(2+)) and one trivalent cation (Al(3+)) have been investigated. The sorption experiments were performed with increasing relative amount of cationic pollution compared to the amount of sorption sites (C(n+)/P ratio) in mono and multi-component solutions to investigate the sorption mechanisms. C(n+)/P proved to strongly affect the sorption capacity and high capacities were obtained for all cations at highest C(n+)/P ratios, reaching one mole of C(sorbed)(n+) per phosphonated moiety. For divalent cations, sorption mechanisms were likely to be described by electrostatic interactions only, whereas for aluminum trivalent cation the sorption not only resulted from electrostatic interactions but also from the formation of coordination binding. The selectivity of the phosphonic acid moieties for aluminum cations was demonstrated, highlighting the interest of P(NnPAAm-stat-(h)MAPC1) for their use for the treatment of metallic pollution from wastewater.

Removal of nickel ions from aqueous solution by low energy-consuming sorption process involving thermosensitive copolymers with phosphonic acid groups.

In order to remove metal ions from wastewaters, thermosensitive copolymers bearing sorption properties toward metal cations were prepared by free radical copolymerization between the N-n-propylacrylamide (NnPAAm) and the (dimethoxyphosphoryl)methyl 2-methylacrylate (MAPC1), followed by a hydrolysis of the phosphonated esters into phosphonic diacid groups ((h)MAPC1). The thermosensitivity and the sorption abilities of the resulting poly(NnPAAm-stat-(h)MAPC1) copolymers were studied. Lower Critical Solution Temperatures (LCST) of these copolymers ranged from 22 °C to 26 °C, depending on the molar ratio of phosphonated monomers and were lower than those obtained with usual poly(N-isopropylacrylamide)-based polymers. The influence of both the temperature and the pH on the sorption properties of the copolymers was evaluated for Ni(2+) cations. The most interesting results were obtained for temperatures around the LCST, i.e. when the proximity of the complexing groups favored the sorption of metallic cations. Concerning the pH effect, the maximum sorption capacity was obtained at pH 7, i.e. in the absence of competition between the sorption of H(+) and Ni(2+) ions on the phosphonic acid groups. The influence of the molar ratio of metal ions and phosphonate moieties was also studied and different sorption mechanisms were proposed.

Phosphorus-containing polymers: a great opportunity for the biomedical field.

This Review is focused on the growing interest brought to phosphorus-containing organic materials for applications in the biomedical field, mainly because of their properties such as biocompatibility, hemocompatibility, and protein adsorption resistance. It mainly describes relevant works achieved on these materials for various applications: dentistry, regenerative medicine, and drug delivery. Special attention was given to 2-methacryloyloxyethyl phosphorylcholine (MPC) monomer as the latter appeared of great importance because of its biomimetic structure due to the presence of the phospholipid group on its structure. As a result, much research effort is currently concentrated on the development of phosphorylcholine-containing (co)polymers that represent a promising class of materials.